FTDX1200 Operating Manual Page 97

MEMORY OPERATION Cont'd
Previous Page    Index of Topics    Table of Contents    Index of Pages    Next Page
STANDARD MEMORY OPERATION Cont'd

Memory Tune Operation
You may freely tune off from any memory channel in a "Memory Tune" mode, this is similar to VFO operation. So as long as you do not over-write the contents of the current memory, Memory Tune operation will not alter the contents of the memory channel.

    1. Prsss the [V/M] button to recall any memory channel.

    2. Press the [MCH/GRP] button.

    3. Rotate the [VFO-B/CLAR] knob to select the memory channel.

    4. Rotate the Main Tuning Dial knob or press the [MODE] button; you will now observe that the memory channel frequency is changing.

ADVICE:

During Memory Tune operation, you may change operationg modes. and engage the offset Clarifier, if desired.

    5. Press [V/M] button momentarily to return to the originally memorized frequency of the current memory channel. One more press of the [V/M] button will return to VFO opertaion.






NOTE:
Computer software programs utilizing the CAT system interface port may presume that the transceiver is operating in the VFO mode, for certain features like "band mapping" and/or frequency logging, because the "Memory Tune" mode so closely resembles the VFO mode. Be sure that you have the FTDX1200 operating in a control mode compatible with your software's requirements. Use the VFO mode if you are not sure.

End of "Standard Memory Operation"

Cont'd Next Page "Memory Operation"
Previous Page    Index of Topics    Table of Contents    Back to Top    Index of Pages    Next Page
FTDX1200 Operating Manual Page 97